8
GETTING STARTED
1. Flip over the air purifier. Locate the “OPEN” and “LOCK” labels printed on the bottom of the air purifier, near the power
cord inlet.
2. Twist the filter cover counterclockwise to the “OPEN” position, lining up the arrow on the filter cover with the arrow
labeled “OPEN”. [Figures 1.1] Lift the cover o the air purifier.
Tabs should face
outward.
3. Remove the filters from their plastic packaging.
4. Place the True HEPA Combination Filter into the air purifier with the pull tabs facing out. Then, place the Pre-Filter into the
air purifier. [Figures 1.2 & 1.3]
Figure 1.1
Figure 1.2 Figure 1.3
To Next Page
Loading...
