10
OPERATION
General Operation
1. Plug the air purifier into a powered electrical outlet. The
unit will chime to indicate that it is connected to a power
source.
2. Tap ‘ ’ to turn on the air purifier. It will start producing
fresh air on fan speed level 2.
3. (Optional): Tap ‘ ’ to change the fan speed of the air
purifier.
4. (Optional): Tap ‘ ’ to adjust the brightness or turn o
the built-in night light.
5. Tap ‘ ’ to turn o the air purifier once you are finished
using the air purifier.
NOTE: It may seem that the airflow is restricted at certain portions of
the air purifier when it is operating. This is normal.
To Next Page
Loading...
