Levoit LV-H132 - Initial Setup Procedure

7
GETTING STARTED
1. Flip over the purifier to reveal the filter cover.
2. Twist the filter cover counterclockwise to the “OPEN” position and remove the cover. [Figure 1.1]
Tabs should face
outward.
3. Remove the filters from their plastic packaging, then reinstall the filters. The white HEPA filter along with the pull tabs
should be facing outward. Place the pre-filter on top of the HEPA filter. [Figures 1.2 & 1.3]
Figure 1.1
Figure 1.2 Figure 1.3
OPEN
LOCK