11
Button Controls
Memory Function
Power Button
Tap once to turn on or turn o the air purifier.
Fan Speed Button
Tap ‘
’ to cycle through the 3 fan speeds
of the air purifier.
Night Light Button
Activates the night light for the air purifier.
NOTE:
• To eectively clean the air, make sure to keep
the windows closed while the air purifier is
operating. Open the windows regularly to
maintain proper air circulation throughout your
home.
• For best results, it is recommended to run the
air purifier at maximum speed for 15–20 minutes
before using a lower speed setting or setting
the purifier to auto mode.
Filter Reset Button
This button will light up when the air filters
need to be checked or replaced. Tap and
hold ‘ ’ for 3 seconds after checking or
changing the air filters (See Checking the
Air Filters on page 12).
Night Light Operation
Action Function
Tap once. Turns on night light
Tap a second time. Dims the night light.
Tap a third time. Turns o the night light.
Tap and hold.
Turns o all of the lights on
the air purifier. Tap any button
except ‘
’ to turn the lights
back on.
NOTE: Only the button lights will
turn back on. The night light will
remain o until ‘
’ is tapped
once more.
Chart A
The air purifier will remember its programmed settings
when turned o. This includes fan speed and night light
brightness level. The purifier will resume its settings when it
is turned back on.