OUTSIDE MOUNT (OM)
STEP 3: INSTALLING THE SHADE–MOUNTING THE HEADRAIL
•
Fit the front channel on top of the headrail onto the front
lip of installation brackets.
• Push the headrail up and back until it snaps into place.
• Check to ensure the headrail is securely in the brackets.
— Check that the bottom of the headrail is snapped
into the base of each bracket.
— Check that the front lip of each bracket is in the front
channel of the headrail.
— If any brackets are not installed correctly, release the
shade and reinstall. See “Removing the Shade
(If Necessary)” on page 17.
Good Bad
Headrail
Front Lip
Spring Tab
Headrail
Bracket
The front of the bracket
fits under the groove.
Snap in
Place
INSTALLATION
14 Cellular Shades Motorized Control Lift
To Next Page
Loading...
