What to do if Levolor Indoor Furnishing shade will not fit into the installation brackets?
If your Levolor Indoor Furnishing shade doesn't fit into the installation brackets, ensure the brackets are level and aligned, adjusting or shimming if necessary. Verify the mounting screw heads are flush against the bracket and the shade fabric isn't caught between the bracket and headrail. Also, confirm the headrail is fully inserted into the brackets.
Why does my Levolor Cellular Shades shade raise unevenly?
If your Levolor Indoor Furnishing shade raises or lowers unevenly, lower the shade completely to allow it to self-correct. Also, check that the headrail and installation brackets are level and aligned. If needed, shim the installation brackets to level the headrail. You can also adjust the bottom rail.
Illustrates and labels the components of the motorized shade.
Lists the tools and fasteners required for installation, which are not included.
Warns about the importance of using drywall anchors for safe installation.
Details how to pair the shade with the remote control.
Step 1: Marking the bracket locations for inside mount.
Emphasizes the need for brackets to be level and aligned.
Step 2: Installing the brackets for inside mount.
Reinforces the use of drywall anchors for drywall installations.
Warns about mounting brackets flush against a flat surface.
Emphasizes the need for brackets to be level and aligned.
Emphasizes consistency in bracket placement for side mounting.
General| Type | Cellular Shades |
|---|---|
| Material | Fabric |
| Insulation | Yes |
| Mounting | Inside Mount, Outside Mount |
| Lift System | Cordless, Top-Down/Bottom-Up |
| Cell Size | 3/8", 1/2" |
| Sizes | Custom sizes available |
| Colors | Various colors available |
To Next Page
