Levolor Cellular Shades - OUTSIDE MOUNT (OM): INSTALLING BRACKETS; IMPORTANT: Bracket Leveling

OUTSIDE MOUNT (OM)
STEP 2: INSTALLING THE BRACKETS
NOTE: Use drywall anchors when mounting into drywall.
• Drill the screw holes using a
3
⁄32" drill bit.
• Attach the installation or extension brackets using the
screws provided.
IMPORTANT: The front edges of the installation brackets
must be level and aligned to each other.
• If using spacer blocks for added clearance, the spacer blocks
and shims may be stacked.
— A maximum of 1
1
⁄2" of added clearance using spacer
blocks and shims is recommended.
• Attach the spacer blocks and installation brackets to a flat
vertical mounting surface with #6 mounting screws long
enough for asecure installation.
— The top of the spacer blocks should be at the desired
shade height.
— If using extension brackets, attach an installation
bracket to the underside of each extension bracket
using theprovided screws and speed nuts.
Screw
Bracket
Drywall
Anchor
Maximum
1½"
Longer Screw
(Not Provided)
INSTALLATION
13Cellular Shades Motorized Control Lift