Lewmar VX Series User Manual

6
3.6-1
300 mm
(12”)
3.6-2
3.6 Below deck preparation
IMPORTANT:
The positioning of the windlass must be checked prior to cutting for deck/hull and bulkhead clearance.
 WARNING!
Failure to provide minimum vertical fall
will cause jamming.
1.The motor/gearbox is bolted via the through deck mounting bolts.
NOTE: Do not position motor/gearbox below rode/chain pipe fall area.
2. There must be sufficient vertical fall for the chain or rope when hauling in.

Lewmar VX Series Specifications

General

Brand	Lewmar
Model	VX Series
Category	Marine Equipment
Language	English