Need help?Do you have a question about the Lewmar 140 and is the answer not in the manual?
General| Brand | Lewmar |
|---|---|
| Model | 140 |
| Category | Marine Equipment |
| Language | English |
Information on obtaining support and finding dealers.
Contact information for CE approval certificates.
Guidance on paying attention to safety and product damage warnings.
Crucial safety and operational warnings for thruster use and installation.
Safety and operational requirements for fitting the thruster according to the manual.
Safety guidelines for electrical installation, emphasizing qualified personnel.
Key installation mistakes to avoid for proper unit function and longevity.
Steps for marking the fore and aft position and centre line on the hull.
Using a mould to mark the hull opening dimensions based on thruster model.
Cutting the hull opening and fitting the thruster box, ensuring correct dimensions and orientation.
Procedures for installing the standard and flange base versions of the thruster box.
Trimming and fitting the hull hatch to ensure proper clearance and alignment.
Laminating the thruster box and tunnel to the hull for structural integrity.
Correctly installing the drive shaft and motor assembly with shear pins.
Fitting and adjusting the thruster brace for correct retracted position alignment.
Positioning and installing the control panel in a suitable dry location.
Detailed circuit diagrams for connecting single and dual thruster systems.
Adjusting the thruster tunnel position and support brackets for optimal water flow.
How to deploy, operate, and retract the thruster using the control panel.
Understanding error messages like overheating and setting alarm intervals.
Configuring the automatic retraction feature based on time intervals.
Overview of optional accessories like remote control, joystick, foot switch, and water detector.
Guidance on installing additional control panels in parallel for system operation.
Part numbers and descriptions for common spare parts like propellers and anodes.
Routine annual checks and maintenance tasks for the thruster system.
Procedures for replacing shear pins and rubber bellows on specific thruster models.
System voltage, control system fuse, and relevant EMC standards.
Diagnosing and resolving common faults like panel malfunction, incorrect direction, or motor issues.
Detailed warranty terms, limitations, and exceptions for Lewmar products.
Steps for warranty claims, legal rights, governing law, and dispute resolution.
To Next Page
