Lexicon 300 - V3.0 REV - MIDI Dumps of Current Setup, Event List, MIDI Table, and All Registers

Lexicon
300 V 3.0 Owner's Manual
7-8
Go to the MIDI page in Control mode and select "DUMP": The following display
will appear:
MIDI Dumps of Current
Setup, Event List,
MIDI Table, and
All Registers
Dump: ALL REGISTERS
Bulk Dump Dly: 2ms
Pressing any of the buttons in the top row will allow Soft knob selection of the type
of dump you want: All Registers, Current Setup, MIDI Map Table, or MTC Event
List.
Pressing any of the buttons on the bottom row allow Softknob selection of pre-
dump delay of 2ms, 50ms, 100ms or 200ms.
Once you have made the selections you want here, press STORE to send this
MIDI information. Please note that some dumps will take longer than others,
depending on the amount of information to be passed.