Lexicon
300 V 3.0 Owner's Manual
4-18
The Stereo Adjust algorithm offers fine adjustments of level and equalization
during digital mastering. Its stereo digital fader permits 0.25dB trimming and
provides full fades to digital zero at the end of a track. Its two sets of shelving
treble EQ can be set for different 3dB points and gains. BASS and SPEQ permit
adjustment of stereo width, enhancing the spaciousness and depth of the
recording.
General Description
Stereo Adjustments
MSTR BAL ROT DLAY
Off, -72dB to +12dB L+2.9 to R+2.9dB L+2.9 to R+2.9dB 0-5000ms
D-EM 11µs RFnS
On, Off On, Off +L+R,+L-R,+R+L,-R+L
Stereo Adjust EQ and Spatial
BASS TREB LTRB RTRB
Cut, -18dB - +6dB Cut, -18dB - +6dB Cut, -18dB - +6dB Cut, -18dB - +6dB
BXOV TXOV TXLR SPEQ
0.1-26.5kHz 0.1-26.5kHz 0.1-26.5kHz Cut, -6 to +6dB
Stereo Adjust Delay and Feedback
LDLY LFIN RDLY RFIN
0-5000ms 0-500 samples 0-5000ms 0-500 samples
LFBK Lfbk RFBK Rfbk
-99 to +99% -99 to +99% -99 to +99% -99 to +99%
DC Offsets
DCSW L-DC R-DC SHUF
Reset, Manual, Auto -99 to +99% -99 to +99% 0-10
Effect Naming Page
Stereo Adjust
Parameters
Stereo Adjust
Σ Σ
Σ Σ
Level
11 µs
R F'n'S Balance Rotate
L Delay
L/R Dly
R Delay
Equalizer
B XVR BASS+ SPATIAL
TR XVR
TREB+
D-EM
L/R XVR
L TRB+ R TRB+
Lfb
Rfb
L Fine
R Fine
LFB
RFB
Stereo Adjustments Page
MSTR is a stereo level control, with both channels equally attenuated or
boosted. From -12 to +12 the fader moves in .25 dB increments. Below -12 it
moves in .50 dB increments. Below -60 dB the calibration comes in larger steps,
finally dropping to zero output at -72 dB.
MSTR (Master Fader)
To Next Page
Loading...
