Lexicon 300 - V3.0 REV - Compressor Parameters

Lexicon
300 V 3.0 Owner's Manual
4-32
L
R
Expander
Compressor
Predelay
CmpGain
ExpGain
X SLOPE X THRS
SLOPE THRS
ATTACK RELEASE
Compressor Adjustments
DM: PDLY ATC RTC
0-48ms 0-960ms 0-4000ms
MchB THRS GAIN SLP
0 to -40dB 0-24dB 1.0-99.99:1
Expander Adjustments
DM: EXTH EXG EXSL
0 to -70dB 0-24dB 1.0-8.93:1
MchB - - -
---
Effect Naming Page
Compressor
Parameters
Compressor Adjustments Page
PDLY sets the predelay of the audio before the digital VCA.
ATC adjusts the attack time constant.
RTC allows adjustment of the release time constant.
THRS sets the level at which compression starts.
GAIN adjusts the gain of low level signals (below the compression threshold).
SLP controls the slope of the gain reduction curve or the ratio of input level versus
output level.
PDLY
ATC (Attack)
RTC (Release
Time Constant)
THRS (Threshold)
GAIN
SLP (Slope)