3-27
System Operation
Select "Src" and use the Soft knob to designate a setup number (or the current
setup) to be copied; select "Dst" and use the Soft knob to specify the register
number where you want this copy stored. When you have made these selec-
tions, press STORE.
Selecting "EFX" will cause a similar page to appear which allows you to copy the
effect and the patches used in any effect to any other register.
Selecting "MIDI" allows you to copy patches from one effect to another.
Page Nine
Purge Tools
The Purge page allows you to delete all setup or effect registers, the MIDI
Program Change Map Table, or the Time Code Event List. It also allows
reinitialization of a Lexicon demonstration (erasing all user effects and Time
Code Event List data), and a complete reinitialization of the system to its factory
configuration.
Purge Tools: FACTORY
SETUP EFX MIDI TCODE
Select "TCODE" to clear
the Time Code Event List.
Select "SETUP" to clear all
setup registers.
Select "EFX" to clear all ef-
fect registers.
Selecting "FACTORY" restores the 300 to its factory memory
configuration. This selection will destroy all user modifica-
tions of the original factory configurations.
Select "MIDI" to clear the
MIDI Program Change
Map Table.
Pressing any of the active buttons to select one of these options will cause the
display of a warning prompt. When this prompt appears, press STORE to
execute the function.
Be careful! These functions permanently erase user information.
Src : SET Large Hall
Dst: R # _ _ Available
To Next Page
Loading...
