Lexicon
300 V 3.0 Owner's Manual
4-4
Random Hall Basic Sounds
RTIM SIZE ROLL PDLY
.02-60.49s 4-39.4M 0.1-26.5kHz, Flat 0-1000ms
RLVL TDCY BASS XOVR
Off-48dB-Up Full 0.5-21.2kHz 0.2x-4.0x 0.1-26.5kHz
Random Hall Tweaks
SPIN WAND SHAP SPRD
0-48 0µs-37.1ms 0-255 0-250
DIFF LINK SHLF SIZE
0-99 Link/Unlink Off-24dB-Up Full 4-39.4M
Random Hall Pre-Echoes
DLY1 DLY2 RTIM -
0-1000ms 0-1000ms .24-65.39s -
LVL1 LVL2 RLVL -
Off-24dB-Up Full Off-24dB-Up Full Off-24dB-Up Full -
Feedback Pre-Echoes
DLY3 FBK3 DLY4 FBK4
0-2800ms -93 to +93% 0-2800ms -93 to +93%
LVL3 LVL4
Off-24dB-Up Full Off-24dB-Up Full
Effect Naming Page
Random Hall
Parameters
Random Hall Basic Sounds Page
RTIM (Mid-Frequency
Reverb Time)
RTIM sets the reverb time for mid-frequency signals. Because low-frequency
reverb time (BASS) is a multiplier of RTIM, RTIM acts as a master control for the
reverb time.
SIZE sets the rate of buildup of diffusion after the initial period (which is
controlled by DIFF). It also acts as a master control for RTIM and SPRD. The
SIZE control changes a reverb sound from very large to very small. Generally,
SIZE
Diffusion Predelay
R Level
Reverberator
RTIME SIZE SHAPE SPREAD
XOVR
BASS
TDCY LINK
SPIN
Delay 1
Σ
Fbk 3
Delay 3 Level 3
Level 1
Σ
Delay 2
Σ
Level 2
Σ
Fbk 4
Level 4Delay 4
WANDER
Rolloff
SHLF
To Next Page
Loading...
