Lexicon
300 V 3.0 Owner's Manual
4-14
FBK1 and FBK2 determine the amount of recirculation passed back through to
the left and right inputs.
DLY3 (0ms-1000ms) and DLY4 (0ms-1000ms) are also picked off after the
diffusor. The level of each is controlled by LVL3 and LVL4, respectively.
LVL3 and LVL4 determine the loudness of DLY3 and DLY4.
DLY5 (0ms-2800ms) and DLY6 (0ms-2800ms) allow you to build non-diffused
recirculating echoes independent of the reverberator. Each has a feedback
control (FBK5 and FBK6).
FBK5 and FBK6 provide feedback control for DLY5 and DLY6.
LVL5 and LVL6 determine the loudness of DLY5 and DLY6. Remember, these
are undiffused pre-echoes.
DLY3 , DLY4
LVL3,LVL4
DLY5 , DLY6
FBK5, FBK6
LVL5,LVL6
FBK1 , FBK2
To Next Page
Loading...
