2-12
LXP-5 Owner's Manual
The available parameters for each preset are determined by the algorithm
used. All PITCH, DELAY, CHORUS and MULTI presets 49-56 use the
Pitch/Delay Algorithm. MULTI presets 57-64 use the Delay/Reverb algo-
rithm.
Editing a preset
The easiest way to start creating your own sounds is by editing one of the
64 LXP-5 preset programs.
Use FUNCTION and SELECT to choose a preset you would like to change.
Put the LXP-5 into Edit mode by holding the LEARN button in while turning
FUNCTION to EDIT A or B, then releasing the LEARN button. (The
parameters available at EDIT C are discussed in
Chapter 3: MIDI Opera-
tion.)
Turn SELECT to the parameter you wish to edit. The parameter value can
now be modified with the ADJUST knob. (Move ADJUST to a new setting
to activate it.)
The following tables show all of the parameters available at FUNCTION
settings EDIT A and EDIT B. The algorithm used for each parameter is also
shown, with the available range of values, and the appropriate setting of the
SELECT knob.
To Next Page
Loading...
