3-1
MIDI Operation
MIDI Out
3. MIDI Operation
BYPASS
SELECT
LXP-5
LEARN
exicon
EDIT
1
2
3
4
5
6
7
8
PRESET USER
INPUT
MIX
OUTPUT
A
B
C
PITCH
DELA
CHORUS
MULTI
All LXP-5 parameters can be accessed from the unit’s front panel. Using
MIDI, however, offers easier access and more precise control. To get you
started, this chapter starts with simple MIDI applications, and works up to
more complex ones.
Accessing Programs
Up until now, you have used the front panel knobs to save and recall
programs. You can also use MIDI to access these programs. All you need
is a device which can send MIDI Program Change messages, such as a
MIDI-equipped synthesizer, master keyboard controller, foot controller,
sequencer, or the LEXICON MRC, MIDI Remote Controller (Version 2.0 or
higher — you'll need Version 3.0 to access other LXP-5 functions).
A typical MIDI setup is shown below. Connect the MIDI output of the
controller to the MIDI input of the LXP-5, using a standard MIDI cable.
MIDI In
To Next Page
Loading...
Need help?
General
