2-17
Front Panel Operation
Reverb Balance, Output Level and Output Balance interact. The Output
and Reverb Balance parameters are like conventional pan pots, with a 3 dB
loss in the center position. When set at 100%, Output Level contributes 6 dB
of gain to override these losses and provide the best signal-to-noise ratio.
This limits the effect of thebalance controls to their extremes. If you want
smooth dynamic pans, lower the Output Level to between 50% and 100%
to reduce the overrride action.
Editing Additional Parameters
To edit another parameter, simply turn FUNCTION and/or SELECT to a new
parameter and use ADJUST to change the parameter values.
To Next Page
Loading...
