4 Remove the printer top cover.
5 Install the staple finisher to the printer, and then push it down to make sure that it is securely attached to
the printer.
6 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
7 Turn on the printer.
Add the staple finisher in the print driver to make it available for print jobs. For more information, see
“Ad ding
available options in the print driver” on page 317.
Upgrading and migrating 313
To Next Page
Loading...
