Lexmark C4150 User Manual

121 error messages
Error code Description Action
121.02 Fuser went over the required temperature during
EWC/line voltage detection.
See
“Fuser service check” on page 184.
121.03 Fuser hardware and driver mismatch.
121.06 Fuser power is at 100% but did not reach the
required temperature.
121.08 Fuser did not reach the required temperature while
the page is in the fuser.
121.09 Fuser did not reach the required temperature for
motors.
Note: Not applicable to standby mode.
121.10 Fuser did not reach the required temperature
during start of EWC/line voltage detection.
121.11 Fuser reached the required temperature during
final EWC/line voltage detection too late.
121.12 Fuser did not reach the required temperature
during final EWC/line voltage detection.
121.13 Fuser reached the required temperature during
final EWC/line voltage detection too fast.
121.20 Fuser did not reach the required temperature
during steady state control.
121.21 Fuser low power trace heating rate exceeded error
threshold.
121.22 Open fuser relay was detected.
121.23 Fuser reached the required temperature during
final EWC/line voltage detection too late.
121.24 Fuser did not reach the required temperature
during final EWC/line voltage detection.
121.25 Control did not roll over to steady state control after
line voltage detection.
121.26 Fuser did not reach the required temperature
during warm up.
121.28 Fuser did not reach the required temperature
during EP warm up.
121.30 Fuser is on for more than the allowed time after a
gap blowout, and did not reach the required
temperature.
121.31 Fuser too hot.
121.32 Fuser did not reach the required temperature at
100% power.
5028
Diagnostic information
169

Lexmark C4150 Specifications

General

Drivers included	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Time to first page (color, normal)	5.5 s
Print speed (black, normal quality, A4/US Letter)	50 ppm
Maximum duty cycle	150000 pages per month
Recommended duty cycle	2000 - 20000 pages per month
Number of print cartridges	1
Total input capacity	550 sheets
Total output capacity	300 sheets
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	7 3/4, 9, 10, B5, C6, DL
Paper tray media types	Plain paper, Recycled paper, Thin paper
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal, Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Wi-Fi	-
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	3
Maximum internal memory	3072 MB
Sound pressure level (printing)	53 dB
Control type	Touch
Product color	Black, White
Display diagonal	4.3 \
Power consumption (printing)	- W
Operating altitude	0 - 2896 m
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Depth	497.84 mm
Width	474.98 mm
Height	416.56 mm