Lexmark C4150 User Manual

Action Yes No
Step 1
a From the home screen, touch Settings > Reports > Print
Quality Pages.
b On the Device information section of the print quality test page,
check the CalSet values of the following:
• C Developer operating point
• C Laser operating point
• C Linearization stat
• M Developer operating point
• M Laser operating point
• M Linearization stat
• Y Developer operating point
• Y Laser operating point
• Y Linearization stat
• K Developer operating point
• K Laser operating point
• K Linearization stat
Are the values 0?
Go to step 2. The problem is
solved.
Step 2
Perform the blank or white pages service check. See
“Blank or
white pages check” on page 37.
Was an issue found and resolved?
Go to step 3. Go to step 4.
Step 3
Perform the auto alignment service check. See
“Auto alignment
service check” on page 236.
Does the problem remain?
Go to step 4. The problem is
solved.
Step 4
a Enter the Diagnostics menu, and then navigate to:
Printer setup > EP setup > Toner patch sensor adjust
b On the sensor gain characterization row, touch Start.
c On the sensor gain verification row, touch Start.
d On the sensor gain verification section of the test page, check
the average signal values of the patch number.
Are the values within the requirement?
The problem is
solved.
Go to step 5.
Step 5
a Remove the imaging kit.
b Move the TPS wiper mechanism lever up and down.
Does the wiper mechanism properly move?
Go to step 8. Go to step 6.
5028
Diagnostic information
235

Lexmark C4150 Specifications

General

Drivers included	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Time to first page (color, normal)	5.5 s
Print speed (black, normal quality, A4/US Letter)	50 ppm
Maximum duty cycle	150000 pages per month
Recommended duty cycle	2000 - 20000 pages per month
Number of print cartridges	1
Total input capacity	550 sheets
Total output capacity	300 sheets
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	7 3/4, 9, 10, B5, C6, DL
Paper tray media types	Plain paper, Recycled paper, Thin paper
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal, Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Wi-Fi	-
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	3
Maximum internal memory	3072 MB
Sound pressure level (printing)	53 dB
Control type	Touch
Product color	Black, White
Display diagonal	4.3 \
Power consumption (printing)	- W
Operating altitude	0 - 2896 m
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Depth	497.84 mm
Width	474.98 mm
Height	416.56 mm