• #1 Phillips screwdriver, magnetic
• #2 Phillips screwdriver, magnetic
• #2 Phillips screwdriver, magnetic short-blade
• 7/32 inch (5.5 mm) open-end wrench
• 7.0 mm nut driver
• Needle‑nose pliers
• Diagonal side cutters
• Spring hook
• Feeler gauges
• Analog or digital multimeter
• Parallel wrap plug 1319128
• Twinax/serial debug cable 1381963
• Coax/serial debug cable 1381964
• Flash light (optional)
• 3 mm hex wrench
5028
General information
32
To Next Page
