Lexmark C950 User Manual

4 Wipe only the exterior of the printer, making sure to include the standard exit bin.
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.
5 Make sure the paper support and standard exit bin are dry before beginning a new print job.
MAKE SURE THE PAPER FEED ROLLERS ARE CLEAN AND ARE NOT CONTAMINATED WITH DUST
1 Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
2 Remove the paper feed rollers.
Note: For instructions on how to remove and reinstall the paper feed rollers, see the setup sheet that came with the rollers
inside the compartment box of Tray 1.
3 Dampen a clean, lint-free cloth with water.
4 Clean the paper feed rollers.
Warning—Potential Damage: Do not touch the rubber. Doing so will damage the rollers.
5 Reinstall the paper feed rollers.
Note: Make sure to replace the worn or defective paper feed rollers.
Solid color pages
MAKE SURE THE PHOTOCONDUCTOR IS NOT DEFECTIVE AND IS INSTALLED CORRECTLY
Remove and then reinstall the photoconductor. If the problem continues, then the photoconductor may need to be replaced.
Streaked horizontal lines appear on prints
ABCDE
ABCDE
ABCDE
Try one or more of the following:
Print quality guide
Page 7 of 12

Lexmark C950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1.2 GHz
Connectivity	Ethernet, USB
Print Technology	Laser
Print Speed	50 ppm
Monthly Duty Cycle	300000 pages
Recommended Monthly Page Volume	5, 000 - 33, 000 pages
Memory	1024 MB
Hard Drive	Optional
Output Capacity	500 sheets
Interface	USB 2.0
Media Type	Plain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity	5140 sheets
Media Sizes	Letter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems Supported	Windows, Mac, Linux