Lexmark CS410 - Page 132

Supported bar codes
132
UPC-A YYYYYYY UPC-A is a 12-digit numeric symbology consisting
of 11 data digits and one check digit. The first digit is
a number system digit that usually represents the
type of product being identified.
The next five digits are a manufacturer code,
followed by a 5-digit product identifier. The last digit
is the checksum.
UPC-A allows for a supplemental two- or five-digit
number to be appended to the main bar code
symbol.
UPC-A + 2-digit
supplemental
YYYYYYY
2
UPC-A + 5-digit
supplemental
YYYYYYY
2
Bar code name
Lexmark Forms and Bar Code Card v3.0 Lexmark Forms and Bar Code Card v3.1 Lexmark Forms and Bar Code Card v3.2 Lexmark Forms and Bar Code Card v3.3 LDSS Forms  Composer  v3.3.9 LDSS  Document  Producer Lexmark Optra Forms
Sample image Comments
1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries
have been installed in Optra Forms.
2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms
when the bar code option is installed in
the printer, and the accompanying bar code dictionaries is installed in Optra Forms.
3 These bar codes are not available in PCL 5 or PostScript.