Lexmark CS410 - Page 133

Supported bar codes
133
UPC-E YYYYYYY UPC-E is a six-digit UPC symbology.
UPC-E compresses a normal 12-digit UPC-A code
into a six-digit code by suppressing the first (number
system) digit, trailing zeros in the manufacturer
code, and leading zeros in the product identification
part of the bar code.
A seventh check digit is encoded into a parity
pattern for the six main digits.
The UPC-E code can only be used if the number
system digit is 0 and the original 10 data characters
have at least four zeros.
UPC-E allows for a supplemental two- or five-digit
number to be appended to the main bar code
symbol.
UPC-E + 2-digit
supplemental
symbol
YYYYYYY
2
UPC-E + 5-digit
supplemental
YYYYYYY
2
Bar code name
Lexmark Forms and Bar Code Card v3.0 Lexmark Forms and Bar Code Card v3.1 Lexmark Forms and Bar Code Card v3.2 Lexmark Forms and Bar Code Card v3.3 LDSS Forms  Composer  v3.3.9 LDSS  Document  Producer Lexmark Optra Forms
Sample image Comments
1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries
have been installed in Optra Forms.
2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms
when the bar code option is installed in
the printer, and the accompanying bar code dictionaries is installed in Optra Forms.
3 These bar codes are not available in PCL 5 or PostScript.