• Do not use labels that have exposed adhesive.
• Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.
• Do not load a sheet of labels through the machine more than once.
• Load labels into the manual bypass feeder with the recommended print side faceup and the top edge going in first.
When printing on card stock:
• Set the Paper Type to Card Stock from the printer driver.
• Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting
introduces semi‑liquid and volatile components into the printer.
• Do not use card stock that is creased. It may cause paper jams.
• We recommend the use of grain short card stock.
• Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in
first.
Lexmark X860e, X862e, and X864e
Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not
recommend using vinyl or polyester labels.
The Lexmark X860e, X862e, and X864e support stocks up to 216 g/m
2
. Always feed labels and card stock from Tray 1,
2 or the multipurpose feeder.
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Paper source Media types Weight
Tray 1 Paper, Labels, Transparencies
64‑105 g/m
2
Tray 2 Paper, Card stock, Labels, Transparencies
64‑216 g/m
2
Multipurpose feeder Paper, Card stock, Envelopes, Labels, Transparencies
64‑216 g/m
2
Printer specifications 145
To Next Page
Loading...
Need help?
General
