Lexmark CX310 - Optra E, Ep

Optra E, Ep
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The Optra E and Optra Ep support stocks up to 163 g/m
2
(43 lb). Tray 1 can hold up to 10 sheets of card stock or labels.
The following table lists the maximum weights supported by Tray 1 and the manual feed slot.
Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Tag Cover Paper Vinyl
Tray 1
163 g/m
2
163 g/m
2
—
150 g/m
2
—
Manual feed slot
163 g/m
2
163 g/m
2
—
150 g/m
2
—
For paper and transparency specifications, see the printer User's Guide.
Media specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 279–297 mm (11–11.7 in.)
Weight:
120–150 g/m
2
(32–39 lb)
Thickness: 0.13–0.25 mm (0.005–0.01 in.)
Smoothness: 100–400 Sheffield*
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 163 g/m
2
Index Bristol (90 lb)
Up to 163 g/m
2
Tag (100 lb)
For more information, see “Maintenance procedures” on page 14.
Printer specifications 158