Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Tag Cover Paper Vinyl
200‑sheet heavy duty tray
163 g/m
2
163 g/m
2
176 g/m
2
150 g/m
2
265 g/m
2
500‑sheet tray (450 grams)
90 g/m
2
————
500‑sheet tray (550 grams)
135 g/m
2
135 g/m
2
135 g/m
2
165 g/m
2
—
500‑sheet tray (650 grams)
163 g/m
2
163 g/m
2
176 g/m
2
175 g/m
2
300 g/m
2
500‑sheet tray (750 grams)
199 g/m
2
203 g/m
2
216 g/m
2
180 g/m
2
300 g/m
2
Manual feed tray
253 g/m
2
241 g/m
2
285 g/m
2
263 g/m
2
300 g/m
2
For paper and transparency specifications, see your printer User's Guide.
As the following table indicates, the paper tray capacities vary depending on the print material construction. See your
printer documentation for additional specifications.
Estimated tray capacities for labels
Label material 200‑sheet heavy duty tray 500‑sheet card stock & label tray
Paper, dual web 125 sheets 250 sheets
Vinyl, polyester 70 sheets 200 sheets
The following table lists the print material specifications for the special card stock and label trays, as well as guidelines
for the tray position (upper or lower drawer). This information is intended to convey general guidelines for tray and
drawer selection. We recommend that you test your selected print material to determine the best tray and drawer
selection for your application. The material type, rigidity, sizing, perforations, die-cuts, and surface influence printing
reliability. Contact your point of purchase for more information on the optional trays available for your printer.
Note: If you use materials with a weight over 135 g/m
2
(36 lb bond), print registration and skew may be
unpredictable.
Card stock and labels supported (11‑inch card stock and label trays)
Media Paper/card stock
1
Pressure‑sensitive paper
labels
2
Pressure‑sensitive vinyl
labels
2
200‑sheet heavy duty tray
75–163 g/m
2
(20–43 lb bond)
120–150 g/m
2
(32–40 lb bond)
260–265 g/m
2
82 lb Liner
500‑sheet tray (450 grams)
60–90 g/m
2
(16–24 lb bond)
NA NA
500‑sheet tray (550 grams)
75–135 g/m
2
(20–36 lb bond)
140–165 g/m
2
(37–44 lb bond)
NA
1
You can manually feed card stock with a weight up to 285 g/m
2
.
2
For pressure‑sensitive materials under 131 g/m
2
, grain long is recommended. For pressure‑sensitive materials over
131 g/m
2
, grain short is recommended.
Printer specifications 152
To Next Page
Loading...
Need help?
General
