Lexmark CX310 - Page 49

The Lexmark C752 prints on many labels designed for use with laser printers.
The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m
2
paper, reliably feed all supported media.
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Note: The optional 2000‑sheet drawer supports paper only
Print material specifications
Print material
Range or maximum weight supported
500‑sheet tray and optional
500‑sheet drawer
Multipurpose feeder
Paper
1
(grain direction
2
)
Xerographic or business paper
60–176 g/m
2
(16–47 lb bond)
60–176 g/m
2
(16–47 lb bond)
Card stock
(grain long
2
)
Index Bristol
163 g/m
2
(90 lb) 163 g/m
2
(90 lb)
Tag
163 g/m
2
(100 lb) 163 g/m
2
(100 lb)
Cover
176 g/m
2
(65 lb) 176 g/m
2
(65 lb)
Card stock
(grain short
2
)
Index Bristol
199 g/m
2
(110 lb) 199 g/m
2
(110 lb)
Tag
203 g/m
2
(125 lb) 203 g/m
2
(125 lb)
Cover
216 g/m
2
(80 lb) 216 g/m
2
(80 lb)
Labels Paper
180 g/m
2
(48 lb bond) 199 g/m
2
(53 lb bond)
Dual‑web paper
180 g/m
2
(48 lb bond) 199 g/m
2
(53 lb bond)
Vinyl
3
300 g/m
2
(92 lb liner) 260 g/m
2
(78 lb liner)
Polyester
220 g/m
2
(59 lb bond) 220 g/m
2
(59 lb bond)
Integrated forms
Pressure‑sensitive area
4
140–175 g/m
2
140–175 g/m
2
Paper base (grain long)
75–135 g/m
2
(20–36 lb bond)
75–135 g/m
2
(20–36 lb bond)
1
Paper less than 75 g/m
2
is supported only when the relative humidity is less than 60% and is not supported in duplex.
2
See “Grain orientation” on page 17 for specific recommendations.
3
Vinyl labels are supported only when printing environment and media are 20–32°C (68–90°F).
4
Pressure‑sensitive area must enter the printer first.
For paper and transparency specifications, see the Lexmark C752 Publications CD.
The following table indicates the paper sizes each tray supports.
Printer specifications 49