Lexmark CX331 - Page 102

Menu item Description
Color
Black and White
Gray
Color*
Auto
Specify the color when scanning an image.
Resolution
75 dpi
150 dpi*
200 dpi
300 dpi
400 dpi
600 dpi
Set the resolution of the scanned image.
Darkness
1–9 (5*)
Adjust the darkness of the scanned image.
Orientation
Portrait*
Landscape
Specify the orientation of the original document.
Note: This menu item appears only in some printer models.
Original Size
[List of paper sizes]
Set the paper size of the original document.
Note: Mixed Sizes is the factory default setting.
Sides
O*
Short Edge
Long Edge
Specify the orientation of the original document when scanning on both sides
of the document.
Note: This menu item appears only in some printer models.
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu item Description
Color Balance
Cyan ‑ Red
-4 to 4 (0*)
Magenta ‑ Green
-4 to 4 (0*)
Ye l l o w ‑ Blue
-4 to 4 (0*)
Adjust the color intensity during scanning.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 102