Lexmark CX331 - Network;Ports

Network/Ports
Network Overview
Menu item Description
Active Adapter
Auto*
Standard Network
Wireless
Specify the type of the network connection.
Network Status Show the connectivity status of the printer network.
Display Network Status on
Printer
O
On*
Show the network status on the display.
Speed, Duplex Show the speed of the currently active network card.
IPv4 Show the IPv4 address.
All IPv6 Addresses Show all IPv6 addresses.
Reset Print Server
Start
Reset all active network connections to the printer.
Note: This setting removes all network
configuration
settings.
Network Job Timeout
Disabled
Enabled*
Set the time before the printer cancels a network print job.
Network Job Timeout Time Specify the timeout value (in seconds) when the Network Job Timeout setting
is enabled.
Note: This feature is available only in some printer models.
Banner Page
O*
On
Print a banner page.
Scan to PC Port Range Specify a valid port range for printers that are behind a port blocking firewall.
Enable Network Connections
Enable*
Disable
Enable or disable all network connections.
Enable LLDP
O*
On
Enable Link Layer Discovery Protocol (LLDP) in the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 112