Lexmark CX331 - Page 106

Menu item Description
Sides
O*
Short Edge
Long Edge
Specify the orientation of the original document when scanning on both sides
of the document.
Note: This menu item appears only in some printer models.
File Name Specify the file name of the scanned image.
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu item Description
Color Balance
Cyan ‑ Red
-4 to 4 (0*)
Magenta ‑ Green
-4 to 4 (0*)
Ye l l o w ‑ Blue
-4 to 4 (0*)
Adjust the color intensity during scanning.
Auto Color Detect
Color Sensitivity
1–9 (5*)
Area Sensitivity
1–9 (5*)
FTP Bit Depth
1 bit*
8 bit
Minimum Scan Resolution
75 dpi
150 dpi
200 dpi
300 dpi*
Set the amount of color that the printer detects from the original document.
Contrast
Best for content*
0
1
2
3
4
5
Specify the contrast of the output.
Background Removal
Level
‑4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 106