Setting Value
Device UserID You r e ‑mail address
Device Password Authorization password
Note: The authorization password is provided when IMAP/SMTP service or
POP3/SMTP service is enabled.
Sohu Mail
Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the Sohu
Mail home page, click Options > Settings > POP3/SMTP/IMAP, and then enable either IMAP/SMTP service
or POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sohu.com
Primary SMTP Gateway Port 465
Use SSL/TLS Required
Require Trusted Certificate Disabled
Reply Address You r e ‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID You r e ‑mail address
Device Password Independent password
Note: The independent password is provided when IMAP/SMTP service or
POP3/SMTP service is enabled.
Sina Mail
Note: Make sure that the POP3/SMTP service is enabled on your account. To enable the service, from the
Sina Mail home page, click Settings > More settings > User‑end POP/IMAP/SMTP, and then enable
POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sina.com
Primary SMTP Gateway Port 587
Use SSL/TLS Required
Require Trusted Certificate Disabled
Reply Address You r e ‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID You r e ‑mail address
Set up, install, and configure 38
To Next Page
Loading...
