Lexmark CX510 series User Manual

Print job takes longer than expected
Action Yes No
Step 1
Change the environmental settings of the printer.
a From the printer control panel, navigate to:
Settings > General Settings
b Select Eco‑Mode or Quiet Mode, and then select Off.
Note: Disabling Eco-Mode or Quiet Mode may increase the
consumption of energy or supplies, or both.
Did the job print?
The problem is solved. Go to step 2.
Step 2
Reduce the number and size of fonts, the number and complexity of
images, and the number of pages in the print job, and then resend the job
Did the job print?
The problem is solved. Go to step 3.
Step 3
a Remove held jobs stored in the printer memory.
b Resend the print job.
Did the job print?
The problem is solved. Go to step 4.
Step 4
a Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings > General Settings > Print Recovery > Page Protect > Off
b Resend the print job.
Did the job print?
The problem is solved. Go to step 5.
Step 5
a Check if the cable connections to the printer and print server are
secure. For more information, see the setup documentation that came
with the printer.
b Resend the print job.
Did the job print?
The problem is solved. Go to step 6.
Step 6
Install additional printer memory, and then resend the print job.
Did the job print?
The problem is solved. Contact
customer
support.
Troubleshooting 275

Lexmark CX510 series Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Display	4.3-inch color touch screen
Monthly Duty Cycle	up to 75, 000 pages
Maximum Paper Size	8.5 x 14 inches
Scanner Type	Flatbed scanner with ADF
Fax	Yes
Processor Speed	800 MHz
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Print Speed (Black)	32 ppm
Print Speed (Color)	32 ppm
Memory	1024 MB
Connectivity	USB, Ethernet
Standard Paper Input	250-sheet input tray
Copier Speed (Black)	32 cpm
Copier Speed (Color)	32 cpm