Lexmark CX510 series User Manual

Faxing
Automatic document feeder (ADF) Scanner glass
AB
C
Use the ADF for multiple‑page documents including two-
sided pages.
Use the scanner glass for single-page documents, book pages,
small items (such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
Setting up the printer to fax
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.
Notes:
• The following connection methods are applicable only in some countries or regions.
• During the initial printer setup, clear the fax function check box and any other function you plan to set up later,
and then touch Continue.
• The indicator light may blink red if the fax function is enabled and not fully set up.
Warning—Potential Damage: Do not touch cables or the printer in the area shown while actively sending or
receiving a fax.
Faxing 89

Lexmark CX510 series Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Display	4.3-inch color touch screen
Monthly Duty Cycle	up to 75, 000 pages
Maximum Paper Size	8.5 x 14 inches
Scanner Type	Flatbed scanner with ADF
Fax	Yes
Processor Speed	800 MHz
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Print Speed (Black)	32 ppm
Print Speed (Color)	32 ppm
Memory	1024 MB
Connectivity	USB, Ethernet
Standard Paper Input	250-sheet input tray
Copier Speed (Black)	32 cpm
Copier Speed (Color)	32 cpm