Lexmark CX931 - Page 353

Error codes Error message Solution
72.01 E-mail SMTP server not set up.
Contact system administrator.
Try either of the following:
• Set up the e‑mail function. For more
information, see
“Configuring
the e‑mail
SMTP settings” on page 47.
• Disable the error message. For more
information, see
“Disabling the 'SMTP
server not set up' error message” on
page 410.
72.02 Web Link server not set up.
Contact system administrator.
Contact your system administrator.
72.04 Fax server To Format not set
up. Contact system
administrator.
Try either of the following:
• From the home screen, touch Settings
> Fax > Fax Server Setup > General Fax
Settings.
Configure the To Format setting.
• Contact your system administrator.
80.21 Maintenance Kit near end of
life
Touc h Continue to clear the message.
80.31 Replace maintenance kit. See
“Replacing the tray roller kit” on
page 300.
81.31 Replace roller kit,
recommended life exceeded.
See
“Replacing the ADF roller kit” on
page 304.
82.22 Waste toner bottle nearly
full.
Touc h Continue to clear the message.
82.42 Replace waste toner bottle. See
“Replacing the waste toner bottle” on
page 270.
83.20 Staples low or missing. Try either of the following:
• Remove, and then insert the staple
cartridge.
• Replace the staple cartridge. For more
information, see
“Replacing the staple
cartridge” on page 320.
83.30 Staples empty or misfed.
84.01 [Color] photoconductor unit
nearly low.
Touc h Continue to clear the message.
84.11 [Color] photoconductor unit
low.
84.21 [Color] photoconductor unit
very low.
84.31 Replace [color] photoconductor
unit, recommended life
exceeded.
See
“Replacing a photoconductor unit” on
page 274.
86.23 Scanner maintenance required
soon.
Touc h Continue to clear the message.
Troubleshoot a problem 353