Lexmark CX943 - Page 415

Error codes Error message Solution
72.01 E-mail SMTP server not set up.
Contact system administrator.
Try either of the following:
• Set up your e‑mail function. For more
information, see
“Configuring
the e‑mail
SMTP settings” on page 53.
• Disable the error message. For more
information, see
“Disabling the 'SMTP
server not set up' error message” on
page 486.
72.02 Web Link server not set up.
Contact system administrator.
Contact your system administrator.
72.04 Fax server To Format not set
up. Contact system
administrator.
Try either of the following:
• Tou ch Settings > Fax > Fax Server
Setup > General Fax Settings.
Configure the To Format setting.
• Contact your system administrator.
80.21 Maintenance Kit near end of
life
Tou ch Continue to clear the message.
80.31 Replace maintenance kit. See
“Replacing the tray roller kit” on
page 321.
81.31 Replace roller kit,
recommended life exceeded.
82.22 Waste toner bottle nearly
full.
Tou ch Continue to clear the message.
82.42 Replace waste toner bottle. See
“Replacing the waste toner bottle” on
page 351.
83.20 Staples low or missing. Try either of the following:
• Remove, and then insert the staple
cartridge.
• Replace the staple cartridge. For more
information, see
“Replacing the staple
cartridge unit” on page 376.
83.30 Staples empty or misfed.
84.01 [Color] photoconductor unit
nearly low.
Tou ch Continue to clear the message.
84.11 [Color] photoconductor unit
low.
84.21 [Color] photoconductor unit
very low.
84.31 Replace [color] photoconductor
unit, recommended life
exceeded.
See
“Replacing a photoconductor unit” on
page 300.
86.23 Scanner maintenance required
soon.
Tou ch Continue to clear the message.
Troubleshoot a problem 415