Lexmark Dot Matrix Quick Reference

5 Load the paper stack.
Notes:
• Load with the printable side facedown when using recycled
or preprinted paper.
• Load prepunched paper with the holes on the top edge
toward the front of the tray.
• Load letterhead facedown, with the top edge of the sheet
toward the front of the tray. For two‑sided printing, load
letterhead faceup with the bottom edge of the sheet toward
the front of the tray.
• Make sure the paper is below the maximum paper fill
indicator located on the side of the width guide.
6 Insert the tray.
7 From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams
and print quality problems.
Loading the multipurpose feeder
Use the multipurpose feeder when printing on different paper sizes
and types or specialty media, such as card stock, transparencies, and
envelopes. You can also use it for single‑page print jobs on letterhead.
1 Open the multipurpose feeder.
3

Lexmark Dot Matrix Specifications

General

Brand	Lexmark
Model	Dot Matrix
Category	All in One Printer
Language	English