17
Understanding the control panel lights
Toner cartridge region mismatch
Photoconductor kit life warning
Light sequence:
• Toner Low/Replace PC Kit—On
• Error—On
What this light sequence means:
The geographic region of the printer does not match the
geographic region of the installed toner cartridge.
What you can do:
Remove the toner cartridge, and install a new toner cartridge that
matches the region of the printer (see What supplies do I need
and how do I order them? on page 76).
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—Blinking
What this light sequence means:
The photoconductor is almost full and should be replaced soon.
Note: The Toner Alarm (see Secondary error
codes on page 25) must be turned on for
this message to appear.
What you can do:
• Press and release Continue to clear the light
sequence and continue printing.
• Replace the photoconductor kit. See Changing the
photoconductor kit on page 82 for more information.
To Next Page
Loading...
