What to do if Lexmark All in One Printer displays 'Unformatted flash detected [53]'?
If your Lexmark All in One Printer displays 'Unformatted flash detected [53]', you can: - Press the button on the printer control panel to stop the defragmentation and continue printing. - Format the flash memory device.
How to solve insufficient memory to support resource save feature on Lexmark MS312 Printer?
To resolve the 'Insufficient memory to support Resource Save feature' error on your Lexmark Printer, you can press on the printer control panel to disable Resource Save, clear the message, and continue printing. You can also install additional printer memory.
How to fix paper too short error on Lexmark Printer?
To resolve the 'Paper too short' message on your Lexmark Printer, try the following: * Load the correct size of paper in the tray. * You can press on the printer control panel to clear the message and print using a different tray. * Check the tray length and width guides to ensure the paper is loaded properly. * Make sure the correct paper size and type are specified in Print Properties or the Print dialog, as well as in the Paper menu on the printer control panel. * Ensure the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. * As a last resort, cancel the print job.
What to do if my Lexmark Printer says imaging unit low?
To resolve the 'Imaging unit low' message on your Lexmark Printer, you may need to order an imaging unit. If necessary, press on the printer control panel to clear the message and continue printing.
How to fix replace unsupported imaging unit on Lexmark Printer?
Remove the imaging unit, and then install a supported one to clear the message and continue printing.
How to resolve change [paper source] to [custom string] load [orientation] on Lexmark Printer?
To resolve the 'Change [paper source] to [custom string] load [orientation]' error on your Lexmark Printer, load the correct size and type of paper in the tray or feeder, specify the paper size and type in the Paper menu on the control panel, and then press . Alternatively, select Ignore to use the available paper size and type in the tray or feeder, or cancel the print job.
How to fix incorrect paper size, open [paper source] on Lexmark MS312 Printer?
To resolve the 'Incorrect paper size, open [paper source]' error on your Lexmark Printer, load the correct size of paper in the paper source. You can also press from the control panel to clear the message and print using a different paper source. Check the length and width guides of the paper source and make sure the paper is loaded properly. Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog, and in the Paper menu on the control panel. Also, ensure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed. If none of these steps work, cancel the print job.
What to do if my Lexmark MS312 says imaging unit nearly low?
To resolve the 'Imaging unit nearly low' message on your Lexmark Printer, if necessary, press on the printer control panel to clear the message and continue printing.
How to fix 'Cannot collate large document [37]' error on Lexmark All in One Printer?
To fix the 'Cannot collate large document [37]' error on your Lexmark All in One Printer: - Press the button on the printer control panel to print the portion of the job already stored and begin collating the rest of the print job. - Cancel the current print job.
How to fix 'Load [paper source] with [paper size] [orientation]' error on Lexmark All in One Printer?
To resolve the 'Load [paper source] with [paper size] [orientation]' error on your Lexmark All in One Printer: - Load the tray or feeder with the correct size of paper. - Press the button on the printer control panel to clear the message and continue printing.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Standard Memory | 128 MB |
| Processor Speed | 800 MHz |
| Connectivity | USB 2.0, Ethernet |
| Input Capacity | 250 sheets |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Warranty | 1-year limited warranty |
| Recommended Monthly Page Volume | 500 to 2, 500 pages |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| First Page Out | 6.5 seconds |
| Supported Media Sizes | A4, A5, A6, Letter, Legal, Executive, Folio |
| Supported Media Types | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Output Capacity | 150 sheets |
Guides users on where to find specific printer setup and usage information.
Details the process for installing internal components like memory or cards.
Guides users on how to install additional paper trays for expanded capacity.
Outlines the steps for installing the necessary printer software on a computer.
Details the information needed before setting up the printer on an Ethernet network.
Lists the information required for configuring the printer on a wireless network.
Instructions for setting up the MS312 on a wireless network via software.
Explains how to configure wireless network settings via the Embedded Web Server.
How to print and review printer settings and network configuration pages.
Overview of the printer's control panel buttons and their functions.
Overview of the control panel buttons and their functions for MS315/MS415.
Steps to set the paper size and type for the MS312 printer.
Step-by-step instructions for loading paper into the printer trays.
Detailed steps for loading various paper types into the multipurpose feeder.
Explains how to link and unlink trays for paper feeding on MS312.
Lists paper types that are not recommended for use with the printer.
Tips for choosing and using paper to prevent jams and ensure quality.
Table detailing supported paper sizes across different trays and duplex mode.
Step-by-step instructions for printing a document from Windows or Macintosh.
How to adjust toner darkness settings via Embedded Web Server for MS312.
How to enable and use the two-sided (duplex) printing feature.
Steps to restore printer settings to their original factory defaults.
How to use Eco-Mode to reduce energy, paper, or specialty media usage.
Information about the types of memory in the printer and data storage.
Steps to erase non-volatile memory on MS312 and MS315/MS415 models.
How to set the default paper source for print jobs on MS312.
Tips and instructions for properly loading paper to prevent jams.
How to interpret jam messages and locate jams on the MS312.
Step-by-step instructions for cleaning the exterior and interior of the printer.
Step-by-step instructions for replacing the toner cartridge.
Explains common error messages for the MS312 and how to resolve them.
Troubleshooting steps for network errors related to port [x].
Troubleshooting steps when print jobs are not being sent to the printer.
Troubleshooting steps when pages or images are clipped.
Troubleshooting steps when the Embedded Web Server fails to open.
How to contact customer support, including information needed and available methods.
Basic product details like name, machine type, and model numbers.
Table documenting power consumption in various modes (Printing, Ready, Sleep, Hibernate).
Lexmark's warranty terms regarding manufacturing defects and workmanship.
To Next Page
