To Next Page
A
Amanda JonesSep 4, 2025
How to clear bin full message on Lexmark Printer?
- RrmoranSep 4, 2025
To resolve the 'Bin full' error on your Lexmark Printer, remove the paper stack from the standard bin.
How to clear bin full message on Lexmark Printer?
To resolve the 'Bin full' error on your Lexmark Printer, remove the paper stack from the standard bin.
How to resolve change [paper source] to [custom type name] load [orientation] on Lexmark Printer?
To resolve the 'Change [paper source] to [custom type name] load [orientation]' error on your Lexmark Printer, load the correct size and type of paper in the tray, and then press on the control panel. Alternatively, select Use current [paper source] on the control panel to clear the message and continue printing using the current size and type of paper in the tray, or cancel the print job.
How to enable rear USB port on Lexmark MS312 Printer?
To resolve the 'Rear USB port disabled' message on your Lexmark Printer, you can press on the printer control panel to clear the message and continue printing. You can also set USB Buffer to Auto from the printer control panel.
How to fix memory low, no resource save on Lexmark MS312 Printer?
To resolve the 'Memory low, no Resource Save' error on your Lexmark Printer, you can press on the printer control panel to disable Resource Save, clear the message, and continue printing. You can also install additional printer memory.
How to fix flash memory unformatted on Lexmark MS312 Printer?
To resolve the 'Flash memory unformatted' error on your Lexmark Printer, you can press on the printer control panel to stop the defragmentation and continue printing. You can also format the flash memory device.
What to do if Lexmark MS312 says defective flash memory?
To resolve the 'Defective flash memory' error on your Lexmark Printer, replace the defective flash memory card. You can also press on the printer control panel to ignore the message and continue printing, or cancel the current print job.
How to resolve change [paper source] to [custom string] load [orientation] on Lexmark Printer?
To resolve the 'Change [paper source] to [custom string] load [orientation]' error on your Lexmark Printer, load the correct size and type of paper in the tray or feeder, specify the paper size and type in the Paper menu on the control panel, and then press . Alternatively, select Ignore to use the available paper size and type in the tray or feeder, or cancel the print job.
How to fix cannot defrag flash memory on Lexmark MS312?
To resolve the 'Cannot defrag flash memory' error on your Lexmark Printer, you can press on the printer control panel to stop the defragmentation and continue printing. You can also delete fonts, macros, and other data in the printer memory by navigating to Settings > Print Settings > Utilities Menu > Format Flash > Yes on the printer control panel. Alternatively, install additional printer memory.
What to do if Lexmark MS312 cannot collate large document?
To resolve the 'Cannot collate large document' error on your Lexmark Printer, you can press on the printer control panel to print the portion of the job already stored and begin collating the rest of the print job. Alternatively, you can cancel the current print job.
How to remove paper from standard output bin on Lexmark Printer?
To resolve the 'Remove paper from standard output bin' message on your Lexmark Printer, remove the paper stack from the standard bin.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Standard Memory | 128 MB |
| Processor Speed | 800 MHz |
| Connectivity | USB 2.0, Ethernet |
| Input Capacity | 250 sheets |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Warranty | 1-year limited warranty |
| Recommended Monthly Page Volume | 500 to 2, 500 pages |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| First Page Out | 6.5 seconds |
| Supported Media Sizes | A4, A5, A6, Letter, Legal, Executive, Folio |
| Supported Media Types | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Output Capacity | 150 sheets |
Guides users on where to find specific printer setup and usage information.
Details the process for installing internal components like memory or cards.
Guides users on how to install additional paper trays for expanded capacity.
Outlines the steps for installing the necessary printer software on a computer.
Details the information needed before setting up the printer on an Ethernet network.
Lists the information required for configuring the printer on a wireless network.
Instructions for setting up the MS312 on a wireless network via software.
Explains how to configure wireless network settings via the Embedded Web Server.
How to print and review printer settings and network configuration pages.
Overview of the printer's control panel buttons and their functions.
Overview of the control panel buttons and their functions for MS315/MS415.
Steps to set the paper size and type for the MS312 printer.
Step-by-step instructions for loading paper into the printer trays.
Detailed steps for loading various paper types into the multipurpose feeder.
Explains how to link and unlink trays for paper feeding on MS312.
Lists paper types that are not recommended for use with the printer.
Tips for choosing and using paper to prevent jams and ensure quality.
Table detailing supported paper sizes across different trays and duplex mode.
Step-by-step instructions for printing a document from Windows or Macintosh.
How to adjust toner darkness settings via Embedded Web Server for MS312.
How to enable and use the two-sided (duplex) printing feature.
Steps to restore printer settings to their original factory defaults.
How to use Eco-Mode to reduce energy, paper, or specialty media usage.
Information about the types of memory in the printer and data storage.
Steps to erase non-volatile memory on MS312 and MS315/MS415 models.
How to set the default paper source for print jobs on MS312.
Tips and instructions for properly loading paper to prevent jams.
How to interpret jam messages and locate jams on the MS312.
Step-by-step instructions for cleaning the exterior and interior of the printer.
Step-by-step instructions for replacing the toner cartridge.
Explains common error messages for the MS312 and how to resolve them.
Troubleshooting steps for network errors related to port [x].
Troubleshooting steps when print jobs are not being sent to the printer.
Troubleshooting steps when pages or images are clipped.
Troubleshooting steps when the Embedded Web Server fails to open.
How to contact customer support, including information needed and available methods.
Basic product details like name, machine type, and model numbers.
Table documenting power consumption in various modes (Printing, Ready, Sleep, Hibernate).
Lexmark's warranty terms regarding manufacturing defects and workmanship.
