What to do if Lexmark All in One Printer displays 'Insufficient memory to collate job [37]'?
If your Lexmark All in One Printer displays 'Insufficient memory to collate job [37]': - Press the button on the printer control panel to print the portion of the job already stored and begin collating the rest of the print job.
How to fix replace unsupported imaging unit on Lexmark Printer?
Remove the imaging unit, and then install a supported one to clear the message and continue printing.
What to do if Lexmark Printer says imaging unit very low?
To resolve the 'Imaging unit very low, [x] estimated pages remain' message on your Lexmark Printer, you may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.
What to do if Lexmark MS312 says reinstall missing or unresponsive cartridge?
To address the 'Reinstall missing or unresponsive cartridge' message on your Lexmark Printer, first check if the toner cartridge is missing and install it if it is. If the cartridge is already installed, remove and then reinstall it.
What to do if Lexmark Printer says reinstall missing or unresponsive imaging unit?
To address the 'Reinstall missing or unresponsive imaging unit' message on your Lexmark Printer, first check if the imaging unit is missing and install it if it is. If the imaging unit is already installed, remove and then reinstall it.
What to do if Lexmark MS312 Printer complex page may misprint?
To resolve the 'Complex page may misprint' error on your Lexmark Printer, you can press on the printer control panel to clear the message and continue printing. Alternatively, reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job. You can also cancel the print job or install additional printer memory.
How to troubleshoot network error on Lexmark MS312 Printer?
To resolve a 'Network error, port [x]' message on your Lexmark Printer, you can press on the printer control panel to clear the message and continue printing. You can also try unplugging the router, waiting 30 seconds, and then plugging it back in. Additionally, turn off the printer, wait 10 seconds, and then turn it back on. Finally, you may need to update the network firmware in the printer or the print server. For more information, visit the Lexmark website.
How to fix flash memory full error on Lexmark MS312?
To resolve the 'Flash memory full' error on your Lexmark Printer, you can press on the printer control panel to clear the message and continue printing. You can also delete fonts, macros, and other data stored in the flash memory by navigating to Settings > Print Settings > Utilities Menu > Format Flash > Yes on the printer control panel. Alternatively, use a larger capacity flash memory card.
What to do if Lexmark All in One Printer says 'Insufficient memory to support Resource Save feature [35]'?
If your Lexmark All in One Printer displays 'Insufficient memory to support Resource Save feature [35]': - Press the button on the printer control panel to disable Resource Save, clear the message, and continue printing. - Install additional printer memory.
How to fix replace imaging unit, 0 estimated pages remain on Lexmark MS312 Printer?
Replace the imaging unit to clear the message and continue printing.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Standard Memory | 128 MB |
| Processor Speed | 800 MHz |
| Connectivity | USB 2.0, Ethernet |
| Input Capacity | 250 sheets |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Warranty | 1-year limited warranty |
| Recommended Monthly Page Volume | 500 to 2, 500 pages |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| First Page Out | 6.5 seconds |
| Supported Media Sizes | A4, A5, A6, Letter, Legal, Executive, Folio |
| Supported Media Types | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Output Capacity | 150 sheets |
Guides users on where to find specific printer setup and usage information.
Details the process for installing internal components like memory or cards.
Guides users on how to install additional paper trays for expanded capacity.
Outlines the steps for installing the necessary printer software on a computer.
Details the information needed before setting up the printer on an Ethernet network.
Lists the information required for configuring the printer on a wireless network.
Instructions for setting up the MS312 on a wireless network via software.
Explains how to configure wireless network settings via the Embedded Web Server.
How to print and review printer settings and network configuration pages.
Overview of the printer's control panel buttons and their functions.
Overview of the control panel buttons and their functions for MS315/MS415.
Steps to set the paper size and type for the MS312 printer.
Step-by-step instructions for loading paper into the printer trays.
Detailed steps for loading various paper types into the multipurpose feeder.
Explains how to link and unlink trays for paper feeding on MS312.
Lists paper types that are not recommended for use with the printer.
Tips for choosing and using paper to prevent jams and ensure quality.
Table detailing supported paper sizes across different trays and duplex mode.
Step-by-step instructions for printing a document from Windows or Macintosh.
How to adjust toner darkness settings via Embedded Web Server for MS312.
How to enable and use the two-sided (duplex) printing feature.
Steps to restore printer settings to their original factory defaults.
How to use Eco-Mode to reduce energy, paper, or specialty media usage.
Information about the types of memory in the printer and data storage.
Steps to erase non-volatile memory on MS312 and MS315/MS415 models.
How to set the default paper source for print jobs on MS312.
Tips and instructions for properly loading paper to prevent jams.
How to interpret jam messages and locate jams on the MS312.
Step-by-step instructions for cleaning the exterior and interior of the printer.
Step-by-step instructions for replacing the toner cartridge.
Explains common error messages for the MS312 and how to resolve them.
Troubleshooting steps for network errors related to port [x].
Troubleshooting steps when print jobs are not being sent to the printer.
Troubleshooting steps when pages or images are clipped.
Troubleshooting steps when the Embedded Web Server fails to open.
How to contact customer support, including information needed and available methods.
Basic product details like name, machine type, and model numbers.
Table documenting power consumption in various modes (Printing, Ready, Sleep, Hibernate).
Lexmark's warranty terms regarding manufacturing defects and workmanship.
To Next Page
