What to do if Lexmark MS312 says insufficient memory, some held jobs will not be restored?
To resolve the 'Insufficient memory, some held jobs will not be restored' message on your Lexmark Printer, press on the printer control panel to clear the message. You can also delete other held jobs to free up additional printer memory.
How to fix network [x] software error on Lexmark MS312?
To resolve a 'Network [x] software error' on your Lexmark Printer, you can press on the control panel to continue printing. You can also turn off the printer, wait for about 10 seconds, and then turn it back on. If the problem persists, update the network firmware in the printer or print server. For more information, go to the Lexmark website.
How to fix serial option [x] error on Lexmark MS312 Printer?
To resolve the 'Serial option [x] error' on your Lexmark Printer, make sure that the serial cable is properly connected and is the correct one for the serial port. Also, ensure that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on both the printer and computer. You can press on the printer control panel to continue printing, or turn off the printer and then turn it back on.
How to fix load [paper source] with [custom string] [orientation] error on Lexmark Printer?
To fix the 'Load [paper source] with [custom string] [orientation]' error on your Lexmark Printer, load the indicated tray or feeder with the correct size and type of paper. Alternatively, you can press on the printer control panel to clear the message and continue printing. If all else fails, cancel the current job.
What to do if my Lexmark All in One Printer says 'Paper too short'?
If your Lexmark All in One Printer displays a 'Paper too short' message, consider the following: - Load the correct size of paper in the tray. - Press the button on the printer control panel to clear the message and print using a different tray. - Check the tray length and width guides to ensure the paper is loaded properly. - Verify that the correct paper size and type are specified in Print Properties or the Print dialog. - You can also cancel the print job.
How to fix 'Load [paper source] with [paper size] [orientation]' error on Lexmark All in One Printer?
To resolve the 'Load [paper source] with [paper size] [orientation]' error on your Lexmark All in One Printer: - Load the tray or feeder with the correct size of paper. - Press the button on the printer control panel to clear the message and continue printing.
What to do if Lexmark All in One Printer says 'Incorrect paper size, open [paper source] [34]'?
If your Lexmark All in One Printer displays an 'Incorrect paper size, open [paper source] [34]' message, try the following: - Load the correct size of paper in the paper source. - Press the button on the control panel to clear the message and print using a different paper source.
Why is the print too light on my Lexmark All in One Printer?
If the print from your Lexmark All in One Printer is too light, increase the toner darkness from the Quality menu on the printer control panel.
What to do if Lexmark All in One Printer has paper curl?
If you are experiencing paper curl with your Lexmark All in One Printer: - Move the width and length guides in the tray to the correct positions for the size of the paper loaded. - Resend the print job.
How to fix 'Load MP feeder with [custom type name] [orientation]' error on Lexmark All in One Printer?
To fix the 'Load MP feeder with [custom type name] [orientation]' error on your Lexmark All in One Printer: - Load the feeder with the correct size and type of paper. - From the printer control panel, press to clear the message and continue printing. - Alternatively, cancel the current job.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Standard Memory | 128 MB |
| Processor Speed | 800 MHz |
| Connectivity | USB 2.0, Ethernet |
| Input Capacity | 250 sheets |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Warranty | 1-year limited warranty |
| Recommended Monthly Page Volume | 500 to 2, 500 pages |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| First Page Out | 6.5 seconds |
| Supported Media Sizes | A4, A5, A6, Letter, Legal, Executive, Folio |
| Supported Media Types | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Output Capacity | 150 sheets |
Guides users on where to find specific printer setup and usage information.
Details the process for installing internal components like memory or cards.
Guides users on how to install additional paper trays for expanded capacity.
Outlines the steps for installing the necessary printer software on a computer.
Details the information needed before setting up the printer on an Ethernet network.
Lists the information required for configuring the printer on a wireless network.
Instructions for setting up the MS312 on a wireless network via software.
Explains how to configure wireless network settings via the Embedded Web Server.
How to print and review printer settings and network configuration pages.
Overview of the printer's control panel buttons and their functions.
Overview of the control panel buttons and their functions for MS315/MS415.
Steps to set the paper size and type for the MS312 printer.
Step-by-step instructions for loading paper into the printer trays.
Detailed steps for loading various paper types into the multipurpose feeder.
Explains how to link and unlink trays for paper feeding on MS312.
Lists paper types that are not recommended for use with the printer.
Tips for choosing and using paper to prevent jams and ensure quality.
Table detailing supported paper sizes across different trays and duplex mode.
Step-by-step instructions for printing a document from Windows or Macintosh.
How to adjust toner darkness settings via Embedded Web Server for MS312.
How to enable and use the two-sided (duplex) printing feature.
Steps to restore printer settings to their original factory defaults.
How to use Eco-Mode to reduce energy, paper, or specialty media usage.
Information about the types of memory in the printer and data storage.
Steps to erase non-volatile memory on MS312 and MS315/MS415 models.
How to set the default paper source for print jobs on MS312.
Tips and instructions for properly loading paper to prevent jams.
How to interpret jam messages and locate jams on the MS312.
Step-by-step instructions for cleaning the exterior and interior of the printer.
Step-by-step instructions for replacing the toner cartridge.
Explains common error messages for the MS312 and how to resolve them.
Troubleshooting steps for network errors related to port [x].
Troubleshooting steps when print jobs are not being sent to the printer.
Troubleshooting steps when pages or images are clipped.
Troubleshooting steps when the Embedded Web Server fails to open.
How to contact customer support, including information needed and available methods.
Basic product details like name, machine type, and model numbers.
Table documenting power consumption in various modes (Printing, Ready, Sleep, Hibernate).
Lexmark's warranty terms regarding manufacturing defects and workmanship.
To Next Page
