EasyManua.ls Logo

Lexmark MS810 - Page 22

Lexmark MS810
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
2
Warning—Potential Damage: The jammed paper may be
covered with toner, which can stain garments and skin.
7 Install the imaging unit.
Note: Use the arrows on the side of the printer as a guide.
8 Insert the cartridge into the printer, and then push the green handle
back into place.
Notes:
Align the arrows on the guides of the toner cartridge with
the arrows in the printer.
Make sure the cartridge is fully pushed in.
9 Close the multipurpose feeder door and the front cover.
2
1
10 Do either of the following to clear the message and continue
printing:
For touchscreen printer models, touch or Done.
For nontouchscreen printer models, select Next > >
Clear the jam, press OK >
.
[x]page jam, open upper rear door. [202]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
1 Pull down the rear door.
2 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3 Close the rear door.
22

Other manuals for Lexmark MS810

Related product manuals