incorrect margins 153
jammed pages are not
reprinted 175
job prints from the wrong
tray 165
job prints on the wrong
paper 165
paper frequently jams 174
print jobs do not print 162
slow printing 163
tray linking does not work 173
unable to read flash drive 168
printer
minimum clearances 9
moving 9
selecting a location 9
shipping 125
printer configurations 10
printer connectivity
checking 170
printer hard disk
encrypting 92
installing 181
printer hard disk memory 92
erasing 91
printer is not responding 167
printer memory
erasing 91
printer menus 44
printer messages
Defective flash detected 170
Non‑Printer Manufacturer
supply 171
Not enough free space in flash
memory for resources 170
Replace cartridge, printer region
mismatch 170
Unformatted flash detected 170
printer port settings
changing 99
printer ports 12
printer reports
viewing 94
printer settings
restoring factory default 92
printer software
installing 200
printer status 14
printing
confidential print jobs 41
directory list 42
font sample list 42
from a computer 38
from a flash drive 39
from a mobile device 38
held jobs 41
Menu Settings Page 89
repeat print jobs 41
reserve print jobs 41
using Wi‑Fi Direct 38
verify print jobs 41
printing from a computer 38
printing from a flash drive 39
Push Button method 96
R
removing paper jam
in door A 131
in door H 139
in door N 138
in high‑capacity output
expander 137
in mailbox bin 138
in the duplex unit 134
in the fuser 134
in the multipurpose feeder 136
in the output expander 137
in the staple finisher bin 139
in the staple, hole punch
finisher 140
in the staple, hole punch
finisher bin 140
in trays 131
removing staple jam 141, 144
repeat print jobs 41
Replace cartridge, printer region
mismatch 170
replacing
pick roller in the multipurpose
feeder 119
replacing parts
fuser 108
hot roll fuser 111
hot roll fuser wiper 113
pick roller 118
transfer roller 115
replacing supplies
imaging unit 106
staple cartridge 122, 123
toner cartridge 104
restoring factory default
settings 92
running a slideshow 16
S
safety information 6, 7, 8
scheduling power modes 16
securing printer memory 92
security slot
locating 91
selecting a location for the
printer 9
separator sheets
placing 43
setting the paper size 20
setting the paper type 20
setting up e‑mail alerts 94
shipping the printer 125
skewed print 155
Sleep mode
setting 126
slow printing 163
staple cartridge
replacing 122, 123
staple finisher
installing 196
staple, hole punch finisher
installing 198
statement of volatility 92
status of parts
checking 104
status of supplies
checking 104
storing print jobs 41
supplies
conserving 126
supply notifications
configuring 94
supported file types 40
supported flash drives 40
supported operating
systems 200
supported paper sizes 30
supported paper types 33
supported paper weights 35
T
temperature around the
printer 208
toner cartridge
ordering 104
replacing 104
toner darkness
adjusting 165
Index 216
To Next Page
Loading...
