Paper Menu Reports Network/Ports Security Settings
Help Manage Shortcuts
Option Card Menu
3,4
Print All Guides
Copy Guide
E-mail Guide
Fax Guide
FTP Guide
Print Defects Guide
Information Guide
Supplies Guide
Fax Shortcuts
E-mail Shortcuts
FTP Shortcuts
Copy Shortcuts
Profile
Shortcuts
Note: A list of
installed DLEs
(Download
Emulators) appears.
1
Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.
2
Depending on the printer setup, this menu item appears as Standard Network or Network [x].
3
This menu is supported only in select printer models and appears only when one or more DLEs are installed.
4
This menu is supported only for MX410, MX510, and MX511.
Diagnostics menu
Entering the Diagnostics menu
1 Turn
o
the printer.
2 Press and hold 3 and 6 while turning on the printer.
Release the buttons when the splash screen appears.
Registration
These settings adjust the margins of the black plane.
To set the Registration:
1 Print a Quick test page.
a From the Diagnostics menu, navigate to:
Registration > Quick Test
b Retain this page to determine the changes you need to make to the margin settings. The alignment
diamonds in the margins should touch the margins of the page.
The Quick test page contains the following information:
• Printer registration settings
• Code levels
• Alignment diamonds at the top, bottom, and each side
• Horizontal lines for skew adjustment
• General printer information, including current page count, installed memory, processor speed, serial
number, engine ID, and system card ID
2 Change the value of any of the margin settings.
7015
Service menus
220
To Next Page
Loading...
