Asm-index P/N Units/mach Units/FRU Description Removal procedure
3A 41X1370 1 1 Controller board (MX522)
“Controller board
removal” on page 230
4 41X1201 1 1 Power supply, 100V/110V
“Power supply removal”
on page 260
4 41X1202 1 1 Power supply, 220V
“Power supply removal”
on page 260
5 41X1224 1 1 Main drive gearbox
“Main drive gearbox
removal” on page 211
NS 41X2518 1 1 Cable conversion kit
• 41X2528—ADF cable (MX321 and
MX421)
• 41X2526—Control panel flat cable
(MS622)
• 41X2524—Control panel flat cable
(MX421)
• 41X2525—Control panel flat cable
(MX521)
• 41X2530—Flatbed home sensor
extension cable
• 41X2529—Speaker
‑‑
*Note when replacing an L‑shaped board (3A) with a rectangular board (3B):
The following parts from the cable conversion kit (41X2518) also need to be installed:
• Control panel flat cable
• Speaker
• Flatbed home sensor extension cable
• ADF cable (not needed for MX521)
7017-2xx, -4xx, -6xx
Parts catalog
331
To Next Page
Loading...
