Lexmark MX711de 3 - Page 740

Assembly 26: High capacity input tray option 4 (MX810,
MX811, MX812)
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8178 1 1 Sensor (HCIT pass through) with cable See “Sensor (HCIT pick) removal”
on page 591
2 40X8177 1 1 Sensor (HCIT closed) with flag See “Sensor (HCIT closed) with
flag removal” on page 588
3 40X8174 1 1 HCIT media feeder See “HCIT media feeder removal”
on page 592
4 40X8180 1 1 HCIT interface cable See “HCIT drawer assembly
interface cable removal” on
page 587
5 40X8173 1 1 HCIT controller PCBA See “HCIT controller PCBA
removal” on page 582
6 40X8179 1 1 HCIT lift drive motor See “HCIT lift drive motor
removal” on page 585
7 40X8170 1 1 HCIT right cover See “HCIT drawer assembly right
cover removal” on page 581
8 40X7592 1 1 Sensor (HCIT roller position) See “Sensor (pick roll position)
removal” on page 589
9 40X7593 1 1 HCIT pick roller See “HCIT pick arm assembly
removal” on page 579
10 40X8172 1 1 HCIT front cover See “HCIT front cover removal”
on page 578
11 40X7713 1 1 HCIT separation roller See “HCIT separator roll assembly
removal” on page 577
12 40X8176 1 1 HCIT media guide See “HCIT media guide removal”
on page 577
13 40X8168 1 1 HCIT left cover See “HCIT drawer assembly rear
cover removal” on page 580
7463
Parts catalog
740