Lexmark Pro4000 Series User Manual (English)

Other manuals for Lexmark Pro4000 Series

Questions and Answers:

K
Katherine ThompsonJul 26, 2025
Why is my Lexmark Pro4000 All in One Printer not printing all pages?
- M
  Mitchell PaulJul 26, 2025
  If your Lexmark All in One Printer isn't printing or is missing pages, ensure the ink cartridges are correctly inserted. Also, select your printer from the print dialog before sending the print job, and verify that the print job isn't paused. Make sure your printer is set as the default printer. Try removing and reconnecting the USB cable, or removing and reinstalling the printer software.
T
Teresa PetersonJul 30, 2025
What to do if Lexmark Pro4000 is printing blank pages?
- J
  johnsonjenniferJul 30, 2025
  If your Lexmark All in One Printer is printing blank pages, it might be due to improperly installed ink cartridges. Reinstall the ink cartridges and then deep clean and align the printhead.
T
Tiffany CarterAug 3, 2025
What to do if Lexmark Pro4000 is busy or does not respond?
- M
  murphyjonathanAug 3, 2025
  If your Lexmark All in One Printer is busy or not responding, first ensure that the printer is not in sleep mode. If it's not, try reconnecting the printer's power supply.
K
Kimberly CalderonAug 7, 2025
How to fix Lexmark Pro4000 All in One Printer cannot print through USB?
- K
  Kyle TrevinoAug 8, 2025
  If your Lexmark All in One Printer cannot print through USB, check the USB connection. Ensure the USB port is enabled in Windows. If the issue persists, remove and reinstall the printer software.
J
jeffreysmithAug 12, 2025
Why my Lexmark Pro4000 cannot receive faxes?
- J
  Justin DiazAug 12, 2025
  If your Lexmark All in One Printer cannot receive faxes, make sure that you have configured the correct settings for your setup and that the printer is connected to an analog port. Also, ensure that the printer memory is not full and that fax forwarding is disabled. Increase the ringer volume and verify that you have the correct manual answer code.
K
Kimberly DurhamAug 16, 2025
How to troubleshoot Lexmark All in One Printer cannot send faxes?
- B
  Bobby SteeleAug 16, 2025
  If your Lexmark All in One Printer cannot send faxes, make sure that you have registered your user information in the printer. Decrease the transmission speed of the fax modem and enable error correction. Enable automatic fax conversion and ensure that the dial prefix setting is correct.
B
bairdryanAug 21, 2025
What to do if installation screen did not appear during Lexmark Pro4000 installation?
- W
  William MillerAug 21, 2025
  If the installation screen did not appear during the installation of your Lexmark All in One Printer, launch the printer CD manually.

Lexmark Pro4000 Series Specifications

General

Printer Type	All-in-One
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
Connectivity	USB, Ethernet, Wi-Fi
Duplex Printing	Yes
Scanner Type	Flatbed
Operating System Compatibility	Windows, Mac