4 Adjust the paper guides so they rest against the edges of the paper.
Note: Do not force paper into the printer. The paper should be flat against the paper support, and the edges
should be flush against both paper guides.
5 Close the paper feed guard.
6 From the printer control panel, select or confirm your paper settings.
Paper and specialty media guidelines
Load up to Make sure that
100 sheets of plain paper
• The paper guides rest against the edges of the paper.
• You load letterhead paper with the printable side faceup
and the top of the letterhead going into the printer first.
Loading paper and original documents 29
To Next Page
Loading...
